The piranha led datasheet is a comprehensive document that provides detailed technical specifications and information about piranha LEDs, which are a type of high-intensity, blue-violet light-emitting diode. This datasheet is crucial for engineers, designers, and manufacturers in the lighting industry who require precise data to ensure optimal performance and compatibility of their products.

Introduction to Piranha LEDs

Piranha LEDs, named after the fierce fish species, are known for their exceptional brightness and efficiency. These LEDs emit light in the blue-violet spectrum, which is particularly useful in applications such as UV curing, fluorescence, and water purification. The datasheet for piranha LEDs is a critical resource that outlines the key features, specifications, and performance parameters of these advanced diodes.

Key Features of Piranha LEDs

The piranha led datasheet typically includes the following key features: - Brightness: Piranha LEDs are known for their high brightness, which can exceed 100,000 mcd (millicandelas) at peak wavelengths. This makes them suitable for applications that require intense light output. - Wavelength: The datasheet specifies the peak emission wavelength of the LED, which is usually in the range of 365 to 405 nm for piranha LEDs. - Efficiency: These LEDs are highly efficient, with luminous efficiency values often exceeding 100 lm/W (lumens per watt). This efficiency is a result of the advanced semiconductor materials used in their construction. - Color Stability: The datasheet provides information on the color stability of the LED, including any potential shift in color over time or under different operating conditions. - Operating Voltage and Current: The datasheet specifies the forward voltage and forward current required to operate the LED, which is essential for power supply design. - Thermal Management: Information on the thermal resistance and recommended heat sinking solutions is provided to ensure proper thermal management and prevent overheating.

Technical Specifications

The piranha led datasheet includes a variety of technical specifications that are essential for design and application considerations: - Forward Voltage: The forward voltage at which the LED operates, typically measured in volts (V). - Forward Current: The current required to achieve the specified brightness, usually measured in milliamperes (mA). - Optical Output: The total light output of the LED, measured in lumens (lm) or millicandelas (mcd). - Photometric Data: Detailed photometric data, including luminous intensity distribution and color coordinates, which are important for lighting design. - Electrical Characteristics: Information on the maximum and minimum values for forward voltage, forward current, and reverse voltage to ensure safe operation. - Package Dimensions: The physical dimensions of the LED package, including length, width, and thickness, which are important for PCB (Printed Circuit Board) layout.

Application Areas

Piranha LEDs find applications in a wide range of industries due to their unique properties: - UV Curing: The high intensity and specific wavelength of piranha LEDs make them ideal for curing inks, adhesives, and coatings in the printing and packaging industries. - Fluorescence: The blue-violet light emitted by piranha LEDs is used to excite fluorescent materials in scientific research, medical diagnostics, and analytical instruments. - Water Purification: The strong UV-C light can be used to disinfect water and kill harmful bacteria and viruses. - Medical and Dental: These LEDs are used in medical devices for sterilization and dental curing.

Choosing the Right Piranha LED

Selecting the appropriate piranha LED for a specific application requires careful consideration of the datasheet information. Key factors to consider include: - Wavelength: Ensure that the LED's peak emission wavelength matches the requirements of the application. - Brightness: Choose an LED with the required brightness level to achieve the desired light output. - Efficiency: Higher efficiency LEDs will reduce power consumption and heat generation. - Color Stability: If color stability is important, select an LED with a datasheet that specifies low color shift over time. - Thermal Management: Evaluate the thermal characteristics and ensure that the LED can be effectively cooled in the intended application environment.

Conclusion

The piranha led datasheet is an invaluable resource for anyone involved in the design, development, and manufacturing of products that utilize these high-performance LEDs. By providing detailed technical specifications and performance data, the datasheet helps ensure that the right piranha LED is chosen for the application, leading to optimal performance and reliability. As the demand for high-intensity, efficient, and versatile lighting solutions continues to grow, the piranha led datasheet will remain a cornerstone of the lighting industry.